View IP4256CZ6-F_4769996.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
Rev. 1 -- 23 July 2010 Product data sheet
1. Product profile
1.1 General description
The IP4256CZ3-M is a single-channel low-pass filter while the IP4256CZ5-W and IP4256CZ6-F are dual-channel RC low-pass filters. All devices provide high-level ElectroStatic Discharge (ESD) protection. The devices are designed to protect a range of portable communication transmitter applications against unwanted RF signals. The devices incorporate diodes to provide protection to downstream components from ESD voltages up to 25 kV contact discharge far exceeding IEC 61000-4-2, level 4. The devices are manufactured using monolithic silicon technology in lead-free plastic packages.
1.2 Features and benefits
Pb-free, Restriction of Hazardous Substances (RoHS) compliant and free of halogen and antimony (Dark Green compliant) 100 series channel resistance and 30 pF channel capacitance at 0 V bias voltage (DC) ESD protection up to 25 kV contact discharge far exceeding IEC 61000-4-2, level 4 Single and dual-channel integrated -type RC filter network IP4256CZ3-M: single-channel device in a 3-pin Quad Flat-pack No-leads (QFN) compatible MicroPak plastic package IP4256CZ5-W: dual-channel device in a 5-pin plastic package with 0.5 mm pitch IP4256CZ6-F: dual-channel device in a 6-pin QFN compatible MicroPak plastic package with 0.5 mm pitch
1.3 Applications
General-purpose ElectroMagnetic Interference (EMI), Radio Frequency Interference (RFI) filtering and downstream ESD protection for: Cellular phone and Personal Communication System (PCS) mobile handset Cordless telephone Wireless data (WAN/LAN) system
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
1.4 Quick reference data
Table 1. Symbol VESD Quick reference data Parameter electrostatic discharge voltage Conditions all pins to ground contact discharge air discharge Rs(ch) Cch channel series resistance channel capacitance for the total channel; f = 100 kHz Vbias(DC) = 0 V Vbias(DC) = 2.5 V
[1] According to IEC 61000-4-2 model.
[1]
Min 80
Typ 100
Max 25 25 120
Unit kV kV
-
30 19
-
pF pF
2. Pinning information
Table 2. Pin 1 and 2 3 Pinning Description channel 1 filter ground (GND)
1 3 2 Transparent top view
Rs(ch)
Simplified outline
Graphic symbol
IP4256CZ3-M (SOT883)
1
Cch 2 Cch 2
2
3
018aaa042
IP4256CZ5-W (SOT665) 1 and 5 2 3 and 4 channel 1 filter ground (GND) channel 2 filter
5 4 1,3
Cch 2 Cch 2 Rs(ch)
4,5
2 1 2 3
018aaa043
IP4256CZ6-F (SOT886) 1 and 6 2 and 5 3 and 4 channel 1 filter ground (GND) channel 2 filter
1 2 3 1,3
Cch 2 Cch 2 Rs(ch)
4,6
2,5 6 5 bottom view 4
018aaa044
IP4256CZ3-M_CZ5-W_CZ6-F
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 -- 23 July 2010
2 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
3. Ordering information
Table 3. Ordering information Package Name IP4256CZ3-M IP4256CZ5-W IP4256CZ6-F SC-101 Description leadless ultra small plastic package; 3 solder lands; body 1.0 x 0.6 x 0.5 mm plastic surface-mounted package; 5 leads Version SOT883 SOT665 SOT886 Type number
XSON-6 plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm
4. Marking
Table 4. Marking codes Marking code 6M 6W 6F Type number IP4256CZ3-M IP4256CZ5-W IP4256CZ6-F
5. Limiting values
Table 5. Limiting values In accordance with the Absolute Maximum Rating System (IEC 60134). Symbol VCC VESD Parameter supply voltage electrostatic discharge voltage all pins to ground contact discharge air discharge IEC 61000-4-2, level 4 contact discharge air discharge Pch Ptot Tstg Tamb
[1] [2]
[2] [1]
Conditions
Min -0.5 -55 -40
Max +5.6 25 25 8 15 60 120 +150 +85
Unit V kV kV kV kV mW mW C C
channel power dissipation Tamb = 85 C total power dissipation storage temperature ambient temperature Tamb = 85 C
According to IEC 61000-4-2 model. Devices withstand up to 1000 discharges of 25 kV according to the IEC 61000-4-2 model without degradation and exceeds the specified level 4 (8 kV contact discharge).
IP4256CZ3-M_CZ5-W_CZ6-F
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 -- 23 July 2010
3 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
6. Characteristics
Table 6. Channel characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter Rs(ch) Cch channel series resistance channel capacitance for the total channel; f = 100 kHz Vbias(DC) = 0 V Vbias(DC) = 2.5 V IRM VBR VF reverse leakage current breakdown voltage forward voltage per channel; VI = 3.5 V positive clamp; II = 1 mA negative clamp; IF = 1 mA 5.8 -1.5 30 19 0.1 9 +0.4 pF pF A V V Conditions Min 80 Typ 100 Max 120 Unit
Table 7. Frequency characteristics Tamb = 25 C unless otherwise specified. Symbol Parameter il insertion loss Conditions Rsource = 50 ; RL = 50 800 MHz < fi < 3 GHz fi = 1 GHz ct crosstalk attenuation Rsource = 50 ; RL = 50 ; 800 MHz < fi < 3 GHz 20 25 25 dB dB dB Min Typ Max Unit
IP4256CZ3-M_CZ5-W_CZ6-F
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 -- 23 July 2010
4 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
7. Application information
7.1 Insertion loss
The devices are specifically designed as EMI/RFI filters for multichannel interfaces. The measured insertion loss in a 50 system is shown in Figure 2. The insertion loss was measured using a test Printed-Circuit Board (PCB) utilizing laser-drilled micro-via holes that connect the PCB ground plane to the ground pins of the device.
DUT IN
50
OUT TEST BOARD
50
Vgen
018aaa016
Fig 1.
Frequency response setup
0 il (dB) -20
(1) (2) (3) (4) 018aaa045
(5)
-40
-60 10-1
1
10
102
103 104 f (MHz)
(1) IP4256CZ3-M (2) IP4256CZ5-W; pins 1 to 5 (3) IP4256CZ5-W; pins 3 to 4 (4) IP4256CZ6-F; pins 1 to 6 (5) IP4256CZ6-F; pins 3 to 4
Fig 2.
Frequency response curves
IP4256CZ3-M_CZ5-W_CZ6-F
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 -- 23 July 2010
5 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
7.2 Example applications
The IP4256CZ3-M, IP4256CZ5-W and IP4256CZ6-F are designed as EMI/RFI filters for multichannel interfaces. Device selection must be made taking the following into account:
* * * *
the maximum clock frequency the driver strength and the capacitive load the capacitive load of the heat sink the maximum applicable rise and fall times
7.2.1 Medium-speed applications: LCD interfaces
The devices can be used with digital interfaces running at clock speeds up to 25 MHz. Typical applications include LCD interfaces.
7.2.2 Low-speed applications: keypads, serial and control interfaces
The devices are ideally suited for applications with low transfer speeds which demand robust ESD protection and strong EMI filtering. This includes keypads, low-speed serial interfaces and low-speed control signals. The very small footprint of the devices makes it easy to locate the ESD and EMI protection very close to the interface to be protected.
IP4256CZ3-M_CZ5-W_CZ6-F
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 -- 23 July 2010
6 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
8. Package outline
Leadless ultra small plastic package; 3 solder lands; body 1.0 x 0.6 x 0.5 mm SOT883
L 2 b e
L1
3
b1
1
e1
A A1
E
D
0
0.5 scale
1 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A (1) 0.50 0.46 A1 max. 0.03 b 0.20 0.12 b1 0.55 0.47 D 0.62 0.55 E 1.02 0.95 e 0.35 e1 0.65 L 0.30 0.22 L1 0.30 0.22
Note 1. Including plating thickness OUTLINE VERSION SOT883 REFERENCES IEC JEDEC JEITA SC-101 EUROPEAN PROJECTION ISSUE DATE 03-02-05 03-04-03
Fig 3.
Package outline SOT883 (SC-101)
All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved.
IP4256CZ3-M_CZ5-W_CZ6-F
Product data sheet
Rev. 1 -- 23 July 2010
7 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
Plastic surface-mounted package; 5 leads
SOT665
D
A
E
X
S
YS HE
5
4
A
1
e1 e
2
bp
3
wMA Lp detail X
c
0
1 scale
2 mm
DIMENSIONS (mm are the original dimensions) UNIT mm A 0.6 0.5 bp 0.27 0.17 c 0.18 0.08 D 1.7 1.5 E 1.3 1.1 e 1.0 e1 0.5 HE 1.7 1.5 Lp 0.3 0.1 w 0.1 y 0.1
OUTLINE VERSION SOT665
REFERENCES IEC JEDEC JEITA
EUROPEAN PROJECTION
ISSUE DATE 04-11-08 06-03-16
Fig 4.
Package outline SOT665
All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved.
IP4256CZ3-M_CZ5-W_CZ6-F
Product data sheet
Rev. 1 -- 23 July 2010
8 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
XSON6: plastic extremely thin small outline package; no leads; 6 terminals; body 1 x 1.45 x 0.5 mm
SOT886
b 1 2 3 4x L1 L
(2)
e
6 e1
5 e1
4
6x
(2)
A
A1 D
E
terminal 1 index area 0 DIMENSIONS (mm are the original dimensions) UNIT mm A (1) max 0.5 A1 max 0.04 b 0.25 0.17 D 1.5 1.4 E 1.05 0.95 e 0.6 e1 0.5 L 0.35 0.27 L1 0.40 0.32 1 scale 2 mm
Notes 1. Including plating thickness. 2. Can be visible in some manufacturing processes. OUTLINE VERSION SOT886 REFERENCES IEC JEDEC MO-252 JEITA EUROPEAN PROJECTION ISSUE DATE 04-07-15 04-07-22
Fig 5.
Package outline SOT886 (XSON-6/MO-252)
All information provided in this document is subject to legal disclaimers. (c) NXP B.V. 2010. All rights reserved.
IP4256CZ3-M_CZ5-W_CZ6-F
Product data sheet
Rev. 1 -- 23 July 2010
9 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
9. Revision history
Table 8. Revision history Release date 20100723 Data sheet status Product data sheet Change notice Supersedes Document ID IP4256CZ3-M_CZ5-W_ CZ6-F v.1
IP4256CZ3-M_CZ5-W_CZ6-F
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 -- 23 July 2010
10 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
10. Legal information
10.1 Data sheet status
Document status[1][2] Objective [short] data sheet Preliminary [short] data sheet Product [short] data sheet
[1] [2] [3]
Product status[3] Development Qualification Production
Definition This document contains data from the objective specification for product development. This document contains data from the preliminary specification. This document contains the product specification.
Please consult the most recently issued document before initiating or completing a design. The term `short data sheet' is explained in section "Definitions". The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com.
10.2 Definitions
Draft -- The document is a draft version only. The content is still under internal review and subject to formal approval, which may result in modifications or additions. NXP Semiconductors does not give any representations or warranties as to the accuracy or completeness of information included herein and shall have no liability for the consequences of use of such information. Short data sheet -- A short data sheet is an extract from a full data sheet with the same product type number(s) and title. A short data sheet is intended for quick reference only and should not be relied upon to contain detailed and full information. For detailed and full information see the relevant full data sheet, which is available on request via the local NXP Semiconductors sales office. In case of any inconsistency or conflict with the short data sheet, the full data sheet shall prevail. Product specification -- The information and data provided in a Product data sheet shall define the specification of the product as agreed between NXP Semiconductors and its customer, unless NXP Semiconductors and customer have explicitly agreed otherwise in writing. In no event however, shall an agreement be valid in which the NXP Semiconductors product is deemed to offer functions and qualities beyond those described in the Product data sheet.
malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Applications -- Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Limiting values -- Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Terms and conditions of commercial sale -- NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. No offer to sell or license -- Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control -- This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities.
(c) NXP B.V. 2010. All rights reserved.
10.3 Disclaimers
Limited warranty and liability -- Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. Right to make changes -- NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use -- NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or
IP4256CZ3-M_CZ5-W_CZ6-F
All information provided in this document is subject to legal disclaimers.
Product data sheet
Rev. 1 -- 23 July 2010
11 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications.
Quick reference data -- The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products -- Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the
10.4 Trademarks
Notice: All referenced brands, product names, service names and trademarks are the property of their respective owners.
11. Contact information
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com
IP4256CZ3-M_CZ5-W_CZ6-F
All information provided in this document is subject to legal disclaimers.
(c) NXP B.V. 2010. All rights reserved.
Product data sheet
Rev. 1 -- 23 July 2010
12 of 13
NXP Semiconductors
IP4256CZ3-M/CZ5-W/CZ6-F
Single and dual-channel passive filter network with ESD protection
12. Contents
1 1.1 1.2 1.3 1.4 2 3 4 5 6 7 7.1 7.2 7.2.1 7.2.2 8 9 10 10.1 10.2 10.3 10.4 11 12 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1 General description . . . . . . . . . . . . . . . . . . . . . 1 Features and benefits . . . . . . . . . . . . . . . . . . . . 1 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Quick reference data . . . . . . . . . . . . . . . . . . . . 2 Pinning information . . . . . . . . . . . . . . . . . . . . . . 2 Ordering information . . . . . . . . . . . . . . . . . . . . . 3 Marking . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3 Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Application information. . . . . . . . . . . . . . . . . . . 5 Insertion loss . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Example applications . . . . . . . . . . . . . . . . . . . . 6 Medium-speed applications: LCD interfaces . . 6 Low-speed applications: keypads, serial and control interfaces . . . . . . . . . . . . . . . . . . . . . . . 6 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 7 Revision history . . . . . . . . . . . . . . . . . . . . . . . . 10 Legal information. . . . . . . . . . . . . . . . . . . . . . . 11 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 11 Definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Disclaimers . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Contact information. . . . . . . . . . . . . . . . . . . . . 12 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Please be aware that important notices concerning this document and the product(s) described herein, have been included in section `Legal information'.
(c) NXP B.V. 2010.
All rights reserved.
For more information, please visit: http://www.nxp.com For sales office addresses, please send an email to: salesaddresses@nxp.com Date of release: 23 July 2010 Document identifier: IP4256CZ3-M_CZ5-W_CZ6-F

▲Up To Search▲

Price & Availability of IP4256CZ6-F

	To Download IP4256CZ6-F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .